MP080 USER'S MANUAL
INTEL TRITON TX MOTHERBOARD
Foreword
========
This manual is designed to provide the basic necessary information for the
end user to understand and properly use the MP080 mainboard. The mainboard
ensures superlative performance and complete compatibilty with industry
standards, which incorporating many techincal enhancements.
Trademarks
==========
WTC is a registered trademark of Win Technologies Co., Ltd, All trademarks
belong to their registered owner.
Checklist
=========
Your MP080 package contains the following:
* MP080 mainboard
* User's manual
* HDD/FDD Cable
* Coml, Com2 and PS/2 mouse Cable
* Printer Cable
Precautions
===========
Make sure you ground yourself before handling the mainboard or other system
components. Electrostatic discharge will damage the mainboard. Note that you
must take special precaution when handling the mainboard in dry or air-
conditioned environments.
The precaution below is to protect the mainboard from electrostatic
discharge.
* Do not remove the anti-static packaging until you are ready to install the
mainboard and other system components.
* Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself, grasp the expansion slot covers
or other unpainted portion computer chassis.
* Frequently ground yourself while working, or use a grounding strap.
* Handle the mainboard by the edges and avoid touching its components.
Motherboard Features
====================
* Intel 82430TX PCI chipset: 82439TX(MTXC)/ 82371AB(PIIX4)
* Supports Intel P54C/P55C(MMX), Cyrix/lBM 6x86, and AMD KS/K6(MMX)
microprocessors
* Four high performance 32 bits PCI local bus master
* Four 16 bits ISA system bus I/O slots
* 256K/512K synchronous cache onboard
* Main xnemory (DRAM) from 4MB to 256MB, either Fast Page mode / EDO
mode/SDRAM
* Supports Four SIMha and Two DIMM sockets
* Supports two USB (Universal Serial Bus ) ports
* Enchanced IDE onboard( Ultra DMA-33)
* IR port optional
* Supports Windows 95 PnP ( Plug and Play) function and PC97 for I/O
* Enhanced fast I/O ( Serial port, Parallel port (ECP/EPP/SPP), FDC) onboard
* Supports ACPI function
Jumpers, DIP Switch and Connectors Reference
============================================
Before installing the mainboard, make sure that the jumper settings are
properly set for your configuration. The functions of the different jumpers
are respectively as follows:
CPU Clock Selector JP7, JP8, JP9
CPU /BUS Clock Ratio Selector SW1-6,SW1-7,SW1-8
CPU Voltage Selector SW1-1 · 2 · 3 · 4 · 5
Single,Dual Voltage Selector JP15
Flash RORI Voltage Selector JP12
CMOS Charge /Discharge JP3
Mainboard Connectors:
Hard disk Connector IDE 1&IDE2
Printer Connector PRN 1
Floppy Corlnector FDC 1
Serial Connector COMI & COM2
Universal Serial Bus Connector USB
SMI Push Button Connector J7
SMI LED Connector J1
Hard disk LED Connector J3
Keylock and Power LED Connector J6
Speaker Connector J4
Reset Connector J2
Keyboard Connector KB 1
PS/2 Mouse MS 1
Power Supply Connector P1
Jumper Caps reference :
Red cap for voltage selector
Yellow cap for Clock Selector
Black cap for others
CPU Jumper Setting
==================
Before installing the CPU, make sure that the CPU VOLTAGE SELECTOR are set
properly, wrong voltage setting will damage the CPU and mainboard.
SINGLE VOLTAGE CPU: JP15 ALL OPEN
DUAL VOLTAGE CPU: JP15 ALL CLOSE
CPU CORE VOLTAGE REFERENCE
--------------------------
SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 VRE
ON ON ON ON OFF 3.5V
OFF ON ON ON OFF 3.4V
ON OFF ON ON OFF 3.3V
OFF OFF ON ON OFF 3.2V
ON OFF OFF ON OFF 2.9V
OFF OFF OFF ON OFF 2.8V
ON OFF OFF OFF OFF 2.1V
CLOCK SETTING REFERENCE
-----------------------
JP7 JP8 JP9 FREQUENCE
1-2 1-2 1-2 50 MHz
2-3 1-2 1-2 55 MHz
1-2 2-3 1-2 60 MHz
1-2 1-2 2-3 66 MHz
2-3 2-3 1-2 75 MHz
2-3 1-2 2-3 83 MHz
CLOCK RATIO SELECT REFERENCE
----------------------------
SW6 SW7 SW8 P54C P55C
ON ON OFF x2.5 x2.5 (Clock Ratio)
OFF ON OFF x3 x3
ON OFF OFF x2 x2
OFF OFF OFF x1.5 x1.5
Intel CPU (Single Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PP-75 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 0 0 0
PP-90 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
PP-100 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
PP-120 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 0 0
PP-133 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 0 0
PP-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 1 0
PP-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 1 0
P54CT-180 / 3.38V OPEN 1-2 2-3 1-2 0 1 1 1 0 0 1 0
P54CT-180 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 1 0
P54CT-200 / 3.38V OPEN 1-2 1-2 2-3 0 1 1 1 0 0 1 0
P54CT-200 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
Intel CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
P55C-150 / 2.8V CLOSE 1-2 2-3 1-2 0 0 0 1 0 1 1 0
P55C-166 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 1 0
P55C-200 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 0 1 0
P55C-233 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 0 0 0
P55C-266 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 0 1
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
AMD K5 CPU (Single Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
K5PR-75 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 0 0 0
K5PR-90 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
K5PR-100 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
K5PR-120 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
K5PR-133 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
K5PR-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 1 0
K5PR-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 1 0
K5PR-200 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
AMD K6 CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
K6-166 / 2.9V CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 1 0
K6-200 / 2.9V CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 1 0
K6-233 / 3.2V CLOSE 1-2 1-2 2-3 0 0 1 1 0 0 0 0
K6-266 / 3.2V CLOSE 1-2 1-2 2-3 0 0 1 1 0 1 0 1
K6-233 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 0 0 0
K6-266 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 1 0 1
K6-300 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 1 1 1
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IBM/CYRIX CPU (SINGLE Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PR-120 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 1 0 0
PR-133 / 3.52V OPEN 2-3 1-2 1-2 1 1 1 1 0 1 0 0
PR-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 0 0
PR-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 0 0
PR-200 / 3.52V OPEN 2-3 2-3 1-2 1 1 1 1 0 1 0 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
IBM/CYRIX CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PR-120 / 2.8V CLOSE 1-2 1-2 1-2 0 0 0 1 0 1 0 0
PR-133 / 2.8V CLOSE 2-3 1-2 1-2 0 0 0 1 0 1 0 0
PR-150 / 2.8V CLOSE 1-2 2-3 1-2 0 0 0 1 0 1 0 0
PR-166 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 0 0
PR-200 / 2.8V CLOSE 2-3 2-3 1-2 0 0 0 1 0 1 0 0
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IBM/CYRIX M2 CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
MX-166/ 2.9V(133MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 0 0
MX-166/ 2.9V(150MHz) CLOSE 1-2 2-3 1-2 1 0 0 1 0 1 1 0
MX-200/ 2.9V(150MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 1 0 0
MX-200/ 2.9V(166MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 1 0
MX-233/ 2.9V(188MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 1 1 0
MX-233/ 2.9V(200MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 1 0
MX-266/ 2.9V(225MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 0 1 0
MX-266/ 2.9V(233MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 0 0
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IDT-C6 CPU
---------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
C6-150 OPEN 2-3 2-3 1-2 1 1 1 1 0 1 0 0
C6-183 OPEN 1-2 2-3 1-2 1 1 1 1 0 0 1 0
C6-200 OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
C6-225 OPEN 2-3 2-3 1-2 1 1 1 1 0 0 1 0
C6-240 OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
Flash ROM Voltage Selector
==========================
JP12
1-2 5 VOLTS FLASH ROM (SST / WINBOND / Other brand)
2-3 12 VOLTS FLASH ROM (Intel / MX brand)
NOTE: Wrong Voltage jumper setting will danlage the flash ROM and
mainboard.
CMOS Charge / Discharge( Reset)
==============================
JP3
1-2 CMOS CHARGE (DEFAULT)
2-3 CMOS DISCHARGE OR RESET.
IR Jumper Setting
=================
JP1 JP2
1-2 1-2 UART2 IS USED BY COMMUNICATION Port2 (COM2)
2-3 2-3 UART2 IS USED BY Infrared(IR) MOUDULE
MEMORY CONFIGURATION
====================
Memory supports from 4MB upto 256MB by using Standard,EDO or SDRAM.
MEMORY MODULE CONBINATIONS:
SIMM 1,2 SIMM 3,4 DIMM 1 DIMM 2)
(BANK 4,5) (BANK 3, 2) (BANK 2, 3) (BANK 0, 1)
FREE FREE NA FREE
FREE NA FREE FREE
FREE SB SB FREE
NOTE: "SB" means single bank RAM module (single side).
"DB" means double bank RAM moudule(double side).
"NA" means not accessible.
IMPORTANT: We don't recommand mixed 3V DIMM with 5V SIMM modules on the
mainboard. The 5V SIMM data will drive 5V signal to 3V DIMM data
port on the common memory data bus. It will cause 3V DIMM to
degrade. This degradation will change the CMOS properties of 3V
DIMM, and it will reduce the 3V DIMM module life cycle. If you
really want to use 5V SIMMS and 3V DIMMs togeter, please contact
your DRAM Vendor to confirm that 3V DIMMs mixed with 5V SIMMs
will not damage the 3V DIMM chips, and then you can mix 3V DIMMs
and 5V SIMMs on WIN MP080 mainboard.
MAINBOARD CONNECTORS
====================
IDE 1 & 2 HARD DISK CONNECTOR
FDC 1 FLOPPY CONNECTOR
PRN 1 PRINTER PORT CONNECTOR
COM 1 & 2 SERIAL PORT CONNECTOR
USB UNIVERSAL BUS CONNECTOR
MS1 PS/2 MOUSE CONNECTOR
MB 1 KEYBOARD CONNECTOR
IR1 INFRARED MODULE CONNECTOR
J7 SMI SWITCH CONNECTOR
J3 HARD DISK LED CONNECTOR
J6 ]KEYLOCK & POWER LED
J4 SPEAKER CONNECTOR
J2 RESET CONNECTOR
J1 SMI LED CONNECTOR
AWARD BIOS SETUP
================
Award BIOS support plug and play function and has a built-in setup program
that allows the users to modify the basic system configuration. This type of
information is stored in CMOS so that it retains the setup information when
the power is turned off.
1. Turn on or reboot the system. when the below message appears at the
bottom of the screen during the POST ( Power On Self Test ) press DEL
key to enter setup.
2. Press the DEL key to enter the Award BIOS program and the main menu
will appear on the screen. The main menu allows you to select from ten
setup functions and two exit choices.
3. For the safe, please select "LOAD SETUP DEFAULTS" for BIOS setup.
--- end of manual ---
MP071 USER'S MANUAL (MP071 and MP071A)
INTEL VX PENTIUM PCI/ISA MOTHERBOARD
Note: For MP071B, please download MP071B user's manual. This file is only
for MP071 and MP071A.
Foreword
========
This manual is designed to provide the basic necessary information for the
end user to understand and properly use the MP071 mainboard.The mainbord
ensures superlative performance and complete compatibilty with industry
standards, which incorporating many techincal enhancements.
Trademarks
==========
WTC is a registered trademark of Win Technologies Co., Ltd. All trademarks
belong to their registered owner.
Checklist
=========
Your MP071 package contains the following:
* MP071 mainboard
* User's manual
* HDD/FDD Cable
* Coml & Com2 Cable
* Printer Cable
Precautions
===========
Make sure you ground yourself before handling the mainboard or other system
components. Electrostatic discharge will damage the mainboard. Note that you
must take special precaution when handling the mainboard in dry or air-
onditioned environments.
The precaution below is to protect the mainboard from electrostatic
discharge.
* Do not remove the anti-static packaging until you are ready to install the
mainboard and other system components.
+ Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself, grasp the expansion slot
covers or other unpainted portion computer chassis.
* Frequently ground yourself while working, or use a grounding strap.
* Handle the mainboard by the edges and avoid touching its components.
Mainboard Features
==================
+ Intel 430VX PCI chipset: 82437(TVX)/ 82438(TDX)/ 82371 (PIIX3)
* Supports Intel Pentuim, Cyrix6X86 and AMD K5 microprocessor
* Three high performance 32 bits PCI local bus master
* Four 16 bits ISA system bus I/O slots
* 256K synchronous cache onboard, upgradable to 512K, write back cache
policy
* Main memory (DRAM) from 4MB to 128MB, either Page mode / EDO mode
* Supports SDRAM(Option) ,DIMM socket
* Supports two USB (Universal Serial Bus) ports
* Enhanced IDE onboard
* Support PnP( Plug and Play) function
* Enhanced fast I/O ( Serial port, Parallel port (ECP/EPP/SPP), FDC)
onboard
Remarks:
========
MP071 has three versions with different specs. Please refer to the proper
jumper setting .
Jumpers and Connectors Reference
================================
Before installing the mainboard, make sure that thejumper settings are
properly set for your configuration. The functions of the different
jumpers are respectively as follows:
CPU Clock Selector JP8,JP9
CPU Internal Clock Selector JP17,JP18
CPU Voltage Selector JP11,JP13,JP14,JP19
Cache Size Selector JP7,JP15
Flash ROM Voltage Selector JP3
AT Bus Clock Speed Selector JP4
CMOS Charge/Discharge JP6
Mainboard Connectors:
=====================
Hard disk Connector IDEI&IDE2
Printer Connector PRN1
FloppyConnector FDCI
Serial Connector COMI & COM2
Universal SerialBus Connector USB
SMI Connector J3
Hard disk LED Connector J4
Keylock and Power LED Connector J5
SpeakerConnector J6
Reset Connector J7
Turbo LED Connector J8
Turbo Switch Connector J9
Keyboard Connector KB1
PS/2 Mouse MS1
Power Supply Connector P1
Jumper Caps reference
=====================
Red cap for voltage selector
White cap for CPU type
Yellow cap for Clock Selector
Blue cap for Cache option
Black cap for others
CPU JUMPER SETTING (for MP071)
Before installing the CPU, make sure that the CPU VOLTAGE SELECTOR is set
properly.Please refer the CPU VOLTAGE SELECTOR,wrong setting will damage
the CPU.
NOTE: CPU has two different types of voltage (A) Single Voltage (B) Dual
Voltage
CPU TYPE CPU Clock Selector CPU Internal Clock Selector
YELLOW jumper Cap WHITE jumper Cap
INTEL CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE
PP-75 75 Mhz OP OP 50 Mhz OP OP x1.5
PP-90 90 Mhz OP CL 60 Mhz OP OP x1.5
PP-100 100 Mhz CL OP 66 Mhz OP OP x1.5
PP-120 120 Mhz OP CL 60 Mhz CL OP x2
PP-133 133 Mhz CL OP 66 Mhz CL OP x2
PP-150 150 Mhz OP CL 60 Mhz CL CL x2.5
PP-166 166 Mhz CL OP 66 Mhz CL CL x2.5
P54CT-180 180 Mhz OP CL 60 Mhz OP CL x3
P54CT-200 200 Mhz CL OP 66 Mhz OP CL x3
DUAL VOLTAGE
P55C-150 150 Mhz OP CL 60 Mhz CL CL x2.5
P55C-166 166 Mhz CL OP 66 Mhz CL CL x2.5
P55C-200 200 Mhz CL OP 66 Mhz OP CL x3
OP = OPEN CL = CLOSE
CYRIX CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE
6X86-PR120 100 Mhz OP OP 50 Mhz OP OP x2
6X86-PR133 110 Mhz CL CL 55 Mhz OP OP x2
6X86-PR150 120 Mhz OP CL 60 Mhz OP OP x2
6X86-PR166 133 Mhz CL OP 66 Mhz OP OP x2
DUAL VOLTAGE
6X86-PR120 100 Mhz OP OP 50 Mhz OP OP x2
6X86-PR133 110 Mhz CL CL 55 Mhz OP OP x2
6X86-PR150 120 Mhz OP CL 60 Mhz OP OP x2
6X86-PR166 133 Mhz CL OP 66 Mhz OP OP x2
AMD CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE CPU
AMD-K5-PR75 OP OP 50 Mhz OP OP x1.5
AMD-K5-PR90 OP CL 60 Mhz OP OP x1.5
AMD-K5-PR100 CL OP 66 Mhz OP OP x1.5
DUAL VOLTAGE CPU
AMD-K5-PR120 OP CL 60 Mhz OP OP x1.5
AMD-K5-PR133 CL OP 66 Mhz OP OP x1.5
AMD-K5-PR1SO OP CL 60 Mhz CL OP x2
AMD-K5-PR166 CL OP 66 Mhz CL OP x2
OP = OPEN CL = CLOSE
CPU JUMPER SETTING (for MP071A)
==================
Before installing the CPU, make sure that the CPU VOLTAGE SELECTOR is set
properly. Please refer the CPU VOLTAGE SELECTOR,wrong setting will damage
the CPU.
NOTE: CPU has two different types of voltage (A) Single Voltage (B) Dual
Voltage
CPU TYPE CPU Clock Selector CPU Internal Clock Selector
YELLOW jumper Cap WHFE jumper Cap
INTEL CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE
--------------
PP-75 75 Mhz CL CL 50 Mhz OP OP x1.5
PP-90 90 Mhz OP CL 60 Mhz OP OP x1.5
PP-100 100 Mhz CL OP 66 Mhz OP OP x1.5
PP-120 120 Mhz OP CL 60 Mhz CL OP x2
PP-133 133 Mhz CL OP 66 Mhz CL OP x2
PP-150 150 Mhz OP CL 60 Mhz CL CL x2.5
PP-166 166 Mhz CL OP 66 Mhz CL CL x2.5
P54CT-180 180 Mhz OP CL 60 Mhz OP CL x3
P54CT-200 200 Mhz CL OP 66 Mhz OP CL x3
DUAL VOLTAGE
------------
P55C-150 150 Mkz OP CL 60 Mhz CL CL x2.5
P55C-166 166 Mhz CL OP 66 Mhz CL CL x2.5
P55C-200 200 Mhz CL OP 66 Mhz OP CL x3
OP = OPEN CL = CLOSE
CYRIX CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE
6X86-PR120 100 Mhz CL CL 50 Mhz OP OP x2
6X86-PR133 110 Mhz OP OP 55 Mhz OP OP x2
6X86-PR150 120 Mhz OP CL 60 Mhz OP OP x2
6X86-PR166 133 Mhz CL OP 66 Mhz OP OP x2
DUAL VOLTAGE
6X86-PR120 100 Mhz CL CL 50 Mhz OP OP x2
6X86-PR133 110 Mhz OP OP 55 Mhz OP OP x2
6X86-PR150 120Mhz OP CL 60 Mhz OP OP x2
6X86-PR166 133Mhz CL OP 66 Mhz OP OP x2
AMD CPU JP8 JP9 JP17 JP18
SINGLE VOLTAGE CPU
AMD-K5-PR75 CL CL 50 Mhz OP OP x1.5
AMD-K5-PR90 OP CL 60 Mhz OP OP x1.5
AMD-K5-PR100 CL OP 66 Mhz OP OP x1.5
DUAL VOLTAGE CPU
AMD-K5-PR120 OP CL 60 Mhz OP OP x1.5
AMD-K5-PR133 CL OP 66 Mhz OP OP x1.5
AMD-K5-PR15O OP CL 60 Mhz CL OP x2
AMD-K5-PR166 CL OP 66 Mhz CL OP x2
OP = OPEN CL = CLOSE
CPU VOLTAGE SELECTOR
====================
MP071 is designed to support different types of CPU with Single or Dual
voltage.
NOTE: For Dual Voltage CPU, make sure JP13 and JP19 is set properly ,
WRONG setting will cause Voltage Output Conflict and will DAMAGE the
CPU.
Single Voltage CPU
==================
JP11 JP14 JP19 JP13
SINGLE 3.41V CPU NOT USED 1-2 1-2 CLOSE
SINGLE 3.52V CPU NOT USED 2-3 1-2 CLOSE
Dual Voltage CPU
================
JP14 JP19
DUAL VOLTAGE CPU 2-3 OPEN
JP11 is used to control the VR1 Voltage output for the CPU CORE
JP14 is used to control the VR2 Voltage output for the CPU I/O
JP11 JP14 RED jumper Cap
1-2 2.5 VOLTS 1-2 3.41 VOLTS
3-4 2.7 VOLTS 2-3 3.52 VOLTS
5-6 2.9 VOLTS
FLASH ROM VOLTAGE SELECTOR
==========================
JP3 RED jumper Cap
1-2 12 VOLTS FLASH ROM ( Intel / MX brand)
2-3 5 VOLTS FLASH ROM ( SST / WINBOND brand)
AT-BUS CLOCK SELECTOR
=====================
JP4 YELLOW jumper Cap
OPEN PCI CLOCK/3
CLOSE PCI CLOCK/4
CMOS RESET CONNECTOR
====================
JP6
OPEN CMOS CHARGE
CLOSE CMOS DISCHARGE OR RESET
CACHE SIZE SELECTOR
===================
Cache size selector is used to configure the external cache of the
mainboard. External cache can be configured by using 32K * 32 or 64K * 32
SRAM synchronous cache or cache module.
A. Onboard Synchronous Cache
JP7 JP15 SRAM (U22,U26) TAG RAM (U20)
1-2 1-2 32K*32 8K*8 256K Cache onboard
2-3 1-2 64K*32 16K*8 512K Cache onboard
B. Onboard 256K cache upgrade to 512K
JP7 JP15 SRAM (U22,U26) TAG RAM (U20)
2-3 2-3 32K*32 8K*8 Upgrade to 512K
PLUS WTN CD013
synchronous cache
module
Note: Win CD013 cache module default setting is for upgrade purpose only.
Please contact Edom for detail.
MEMORY CONFIGURATION
====================
Memory supports from 4MB upto 128MB by using Standard , EDO and SDRAM.
NOTE: If DIMM socket is used then SIM3 & 4 can not be used due to memory
Bank Conflict
MEMORY MODULE CONBINATIONS:
BANK O BANK 1 DIMM SOCKET TOTAL MEMORY
SIMM 3 & 4 SIMM 1 & 2
NONE NONE 4MB 4MB
4MBx2 NONE NONE 8MB
NONE 4MB x 2 NONE 8MB
NONE NONE 8MB 8MB
8MB x 2 NONE NONE 16MB
NONE 8MB x 2 NONE 16MB
NONE NONE 16MB 16MB
8MB x 2 4MB x 2 NONE 24MB
NONE 8MB x 2 8MB 24MB
NONE 4MB x 2 16MB 24MB
8MB x 2 8MB x 2 NONE 32MB
NONE 8MB x 2 16MB 32MB
16MB x 2 NONE NONE 32MB
NONE 16MB x 2 NONE 32MB
NONE NONE 32MB 32MB
4MB x 2 16MB x 2 NONE 40MB
16MB x 2 4MB x 2 NONE 40MB
NONE 16MB x 2 8MB 40MB
8MB x 2 16MB x 2 NONE 48MB
16MB x 2 8MB x 2 NONE 48MB
NONE 16MB x 2 32MB 48MB
32MB x 2 NONE NONE 64MB
NONE 32MB x 2 NONE 64MB
NONE NONE 64MB 64MB
4MB x 2 32MB x 2 NONE 72MB
32MB x 2 4MB x 2 NONE 72MB
NONE 32MB x 2 8MB 72MB
8MB x 2 32MB x 2 NONE 80MB
32MB x 2 8MB x 2 NONE 80MB
NONE 32MB x 2 16MB 80MB
16MB x 2 32MB x 2 NONE 96MB
32MB x 2 16MB x 2 NONE 96MB
NONE 32MB x 2 32MB 96MB
NONE 16MB x 2 64MB 96MB
32MB x 2 32MB x 2 NONE 128MB
NONE 32MB x 2 64MB 128MB
Improtant: Do not use 72-pin SIMM module with more than 24 chips. Module
with more than 24 chips exceeds the design specification of the
memory subsystem and will cause unreliable operation.
CONNECTORS
==========
IDE 1 & 2 HARD DISK CONNECTOR
FDC 1 FLOPPY CONNECTOR
PRN 1 PRINTER PORT CONNECTOR
COM 1 & 2 SERIAL PORT CONNECTOR
USB UNIVERSAL BUS CONNECTOR
MS1 PS/2 MOUSE CONNECTOR
J3 SMI SWITCH CONNECTOR
J4 HARD DISK LED CONNECTOR
J5 KEYLOCK & POWER LED
J6 SPEAKER CONNECTOR
J7 RESET CONNECTOR
J8 TURBO LED CONNECTOR
J9 TURBO SWITCH CONNECTOR
MP071B CPU JUMPER SETTING
OP=OPEN CL=CLOSE
Before installing the CPU, make sure that the CPU VOLTAGE SELECTOR is set
properly. Please refer the CPU VOLTAGE SELECTOR, wrong setting will damage
the CPU.
NOTE: CPU has two different types of voltage (A)Single Voltage (B)Dual Voltage
CPU TYPE, Internal Clock & External Clock Selector
YELLOW jumper Cap WHITE jumper Cap
INTEL CPU, SINGLE VOLTAGE
|
|
Speed |
JP8 |
JP9 |
JP20 |
FSB |
JP17 |
JP18 |
Multi. |
PP-75 |
75Mhz |
1-2 |
1-2 |
1-2 |
50Mhz |
OP |
OP |
x1.5 |
PP-90 |
90Mhz |
2-3 |
1-2 |
1-2 |
60Mhz |
OP |
OP |
x1.5 |
PP-100 |
100Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
OP |
OP |
x1.5 |
PP-120 |
120Mhz |
2-3 |
1-2 |
1-2 |
60Mhz |
CL |
OP |
x2 |
PP-133 |
133Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
CL |
OP |
x2 |
PP-150 |
150Mhz |
2-3 |
1-2 |
1-2 |
60Mhz |
CL |
CL |
x2.5 |
PP-166 |
166Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
CL |
CL |
x2.5 |
P54CT-180 |
180Mhz |
2-3 |
1-2 |
1-2 |
60Mhz |
OP |
CL |
x3 |
P54CT-200 |
200Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
OP |
CL |
x3 |
INTEL CPU, DUAL VOLTAGE
|
|
Speed |
JP8 |
JP9 |
JP20 |
FSB |
JP17 |
JP18 |
Multi. |
P55C-150 |
150Mhz |
2-3 |
1-2 |
1-2 |
60Mhz |
CL |
CL |
x2.5 |
P55C-166 |
166Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
CL |
CL |
x2.5 |
P55C-200 |
200Mhz |
1-2 |
2-3 |
1-2 |
66Mhz |
OP |
CL |
|